HK3026

Tier-one manufacturer — brand supplied may vary ✓ Dimensions checked: ISO table and supplier data agree
$13.18 USD
$13.18 USD
Sale Sold out
Bore30 mm 1.1811 in
Outside dia.37 mm 1.4567 in
Width26 mm 1.0236 in
TypeDrawn cup needle roller bearing, open ends
SealingOpen
Flat-rate shipping — calculated by weight at checkout
  • HK3026 Needle Roller Bearings
1 1

Image is for illustration purposes only.

HK3026 specifications

Specification Metric Inch Basis
Bore (d) 30 mm 1.1811 in ISO table for this designation, confirmed by supplier data
Outside diameter (D) 37 mm 1.4567 in ISO table for this designation, confirmed by supplier data
Width (B) 26 mm 1.0236 in ISO table for this designation, confirmed by supplier data
Bearing type Drawn cup needle roller bearing, open ends Stated by the designation
Seals / shields Open Supplier catalogue listing
Cage Steel Supplier catalogue listing
Material Steel Supplier catalogue listing
Reference ratings: NTN HK3026 catalogue values. Ratings differ slightly between makers; the brand we ship may vary.
Dynamic load rating, C28.47 kN6,400 lbf
Static load rating, C053.82 kN12,099 lbf
Limiting speed, grease5,500 rpm
Limiting speed, oil8,000 rpm

HK3026 is a drawn cup needle roller bearing, open ends, 30 mm bore × 37 mm OD × 26 mm wide (1.1811 × 1.4567 × 1.0236 in). NTN catalogue values for HK3026: dynamic load rating C = 28.47 kN, static C0 = 53.82 kN, limiting speed 5,500 rpm on grease, 8,000 rpm on oil.

The HK3026 is a drawn cup needle roller bearing without an inner ring, designed with a thin-walled outer ring and full complement of needle rollers. This bearing type is used where the shaft or a hardened and ground component serves as the inner raceway.

Related sizes & variants