32016XJ
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32016XJ means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
16 |
Bore | Bore code 16 × 5 = 80 mm |
XJ |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32016XJ specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 80 mm | 3.1496 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 125 mm | 4.9213 in | Supplier catalogue listing |
| Width, assembled (T) | 29 mm | 1.1417 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Cage | Pressed Steel | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32016X (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32016XJ is a tapered roller bearing (metric, ISO 355), 80 mm bore × 125 mm OD × 29 mm wide (3.1496 × 4.9213 × 1.1417 in).
The 32016XJ is a metric tapered roller bearing with an 80 mm bore diameter, conforming to ISO 355 standards. Tapered roller bearings use conical rolling elements between inner and outer raceways, enabling them to support combined radial and axial loads efficiently.
Bore/Inner Diameter Inch: 3.15
Bore/Inner Diameter mm: 80
Outside Diameter Inch: 4.921
Outside Diameter mm: 125
