32014JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32014JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
14 |
Bore | Bore code 14 × 5 = 70 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32014JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 70 mm | 2.7559 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 110 mm | 4.3307 in | Supplier catalogue listing |
| Width, assembled (T) | 25 mm | 0.9843 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (6): confirm suffix codes before ordering
- SKF 32014 X/Q (Timken agricultural interchange)
- TIMKEN 32014X-90KA1 (Timken agricultural interchange)
- FAG 32014X (Timken Interchange Guide)
- NTN 4T-32014X (Timken agricultural interchange)
- KOYO 32014 (SKF Master Interchange)
- NACHI 32014X (SKF Master Interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32014JR is a tapered roller bearing (metric, ISO 355), 70 mm bore × 110 mm OD × 25 mm wide (2.7559 × 4.3307 × 0.9843 in).
The 32014JR is a metric tapered roller bearing from the 320 series, featuring a 70 mm bore diameter, 110 mm outer diameter, and 25 mm width. Tapered roller bearings use conical rolling elements to handle combined radial and axial loads efficiently.
32014JR Tapered Roller Bearing, 70 mm Inner Diameter x 110 mm Outer Diameter x 25 mm Width
