32013JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32013JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
13 |
Bore | Bore code 13 × 5 = 65 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32013JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 65 mm | 2.5591 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 100 mm | 3.937 in | Supplier catalogue listing |
| Width, assembled (T) | 23 mm | 0.9055 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (5): confirm suffix codes before ordering
- SKF 32013 X/Q (Timken agricultural interchange)
- TIMKEN 32013X-90KA1 (Timken agricultural interchange)
- FAG 32013X (SKF Master Interchange)
- NSK 32013X (SKF Master Interchange)
- NTN 4T-32013X (Timken agricultural interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32013JR is a tapered roller bearing (metric, ISO 355), 65 mm bore × 100 mm OD × 23 mm wide (2.5591 × 3.937 × 0.9055 in).
The 32013JR is a metric tapered roller bearing with a 65 mm bore diameter, 100 mm outer diameter, and 23 mm width. This bearing features a tapered raceway design that uses conical rollers to support combined radial and axial loads in a single direction.
