32017JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32017JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
17 |
Bore | Bore code 17 × 5 = 85 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32017JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 85 mm | 3.3465 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 130 mm | 5.1181 in | Supplier catalogue listing |
| Width, assembled (T) | 29 mm | 1.1417 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (3): confirm suffix codes before ordering
- SKF 32017 X/Q (Timken agricultural interchange)
- TIMKEN 32017X-90KA1 (Timken agricultural interchange)
- NTN 4T-32017X (Timken agricultural interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32017JR is a tapered roller bearing (metric, ISO 355), 85 mm bore × 130 mm OD × 29 mm wide (3.3465 × 5.1181 × 1.1417 in).
The 32017JR is a metric tapered roller bearing from the 320 series, designed with an 85 mm bore diameter. Tapered roller bearings use conical rolling elements to handle combined radial and axial loads simultaneously, with load capacity proportional to the contact angle.
32017JR TAPERED ROLLER BEARING
