32017XJ
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32017XJ means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
17 |
Bore | Bore code 17 × 5 = 85 mm |
XJ |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32017XJ specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 85 mm | 3.3465 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 130 mm | 5.1181 in | Supplier catalogue listing |
| Width, assembled (T) | 29 mm | 1.1417 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Cage | Pressed Steel | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (3): confirm suffix codes before ordering
- SKF 32017 X/Q (Timken agricultural interchange)
- TIMKEN 32017X-90KA1 (Timken agricultural interchange)
- NTN 4T-32017X (Timken agricultural interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32017XJ is a tapered roller bearing (metric, ISO 355), 85 mm bore × 130 mm OD × 29 mm wide (3.3465 × 5.1181 × 1.1417 in).
The 32017XJ is a tapered roller bearing with an 85 mm bore diameter, conforming to metric ISO 355 standards. Tapered roller bearings use conical raceways and tapered rollers to handle combined radial and axial loads efficiently in a compact design.
Bore/Inner Diameter Inch: 3.346
Bore/Inner Diameter mm: 85
Outside Diameter Inch: 5.118
Outside Diameter mm: 130
