RMS10-2RS

Tier-one manufacturer — brand supplied may vary ✓ Dimensions confirmed by two independent sources
$43.14 USD
$43.14 USD
Sale Sold out
Bore1-1/4 in 31.75 mm
Outside dia.3-1/8 in 79.38 mm
Width7/8 in 22.23 mm
TypeInch-dimension radial ball bearing, medium series
SealingContact rubber seals, both sides
Flat-rate shipping — calculated by weight at checkout
1 1

Image is for illustration purposes only.

What RMS10-2RS means

CodePositionMeaning
RMS Type Inch-dimension radial ball bearing, medium series
10 Bore Bore in eighths of an inch: 10/8 = 1-1/4 in
2RS Closure Contact rubber seals, both sides

Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.

RMS10-2RS specifications

Specification Metric Inch Basis
Bore (d) 31.75 mm 1-1/4 in (1.25) ISO table for this designation, confirmed by supplier data
Outside diameter (D) 79.38 mm 3-1/8 in (3.125) Two independent catalogue sources agree
Width (B) 22.23 mm 7/8 in (0.875) Two independent catalogue sources agree
Bearing type Inch-dimension radial ball bearing, medium series Stated by the designation
Seals / shields Contact rubber seals, both sides Stated by the designation

RMS10-2RS is an inch-dimension radial ball bearing, medium series, 1-1/4 in bore × 3-1/8 in OD × 7/8 in wide (31.75 × 79.38 × 22.23 mm). It has rubber contact seals on both sides.

The RMS10-2RS is a double-sealed ball bearing from the RMS series, featuring rubber seals on both sides (2RS) to protect against contamination from dust, dirt, and moisture. The sealed design helps retain lubrication and extends bearing service life in demanding environments.

Related sizes & variants

Browse all Ball Bearings →