32314JR
Tier-one manufacturer — brand supplied may vary ✓ Dimensions checked: ISO table and supplier data agreeCouldn't load pickup availability
Image is for illustration purposes only.
What 32314JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
3 |
Diameter series | Diameter series 3 (medium) |
14 |
Bore | Bore code 14 × 5 = 70 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32314JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 70 mm | 2.7559 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 150 mm | 5.9055 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 54 mm | 2.126 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32314M (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32314JR is a tapered roller bearing (metric, ISO 355), 70 mm bore × 150 mm OD × 54 mm wide (2.7559 × 5.9055 × 2.126 in).
The 32314JR is a metric tapered roller bearing conforming to ISO 355 standards, with a 70 mm bore diameter from the 323 series. Tapered roller bearings use conical rolling elements between inner and outer raceways to handle combined radial and axial loads.
32314JR Tapered Roller Bearing, 70 mm Inner Diameter x 150 mm Outer Diameter x 54 mm Width
