32215JR
Tier-one manufacturer — brand supplied may vary ✓ Dimensions checked: ISO table and supplier data agreeCouldn't load pickup availability
Image is for illustration purposes only.
What 32215JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
2 |
Diameter series | Diameter series 2 (light) |
15 |
Bore | Bore code 15 × 5 = 75 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32215JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 75 mm | 2.9528 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 130 mm | 5.1181 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 33.25 mm | 1.3091 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (4): confirm suffix codes before ordering
- SKF 32215J (Timken Interchange Guide)
- TIMKEN 32215 (Timken Interchange Guide)
- FAG 32215A (Timken Interchange Guide)
- NTN 32215U (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32215JR is a tapered roller bearing (metric, ISO 355), 75 mm bore × 130 mm OD × 33.25 mm wide (2.9528 × 5.1181 × 1.3091 in).
The 32215JR is a metric tapered roller bearing from the 322 series, designed with a 75 mm bore diameter. Tapered roller bearings use conical rolling elements to support combined radial and axial loads, with load capacity increasing proportionally to bearing size.
32215JR Tapered Roller Bearing, 75 mm Inner Diameter x 130 mm Outer Diameter x 33.25 mm Width
