32218J
Tier-one manufacturer — brand supplied may vary ✓ Verified against manufacturer sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What 32218J means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
2 |
Diameter series | Diameter series 2 (light) |
18 |
Bore | Bore code 18 × 5 = 90 mm |
J |
Cage | Pressed steel cage |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
32218J specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 90 mm | 3.5433 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 160 mm | 6.2992 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 42.5 mm | 1.6732 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Cage | Pressed steel cage | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| TIMKEN | 32218M we stock this | Timken Interchange Guide |
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32218A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32218J is a tapered roller bearing (metric, ISO 355), 90 mm bore × 160 mm OD × 42.5 mm wide (3.5433 × 6.2992 × 1.6732 in). It has a pressed steel cage. Published interchange tables list it as equivalent to TIMKEN 32218M.
The 32218J is a metric tapered roller bearing from the 322 series, featuring a 90 mm bore diameter. Tapered roller bearings use conical raceways and tapered rollers to handle combined radial and axial loads with high load capacity in a single direction.
Bore/Inner Diameter Inch: 3.543
Bore/Inner Diameter mm: 90
Outside Diameter Inch: 6.299
Outside Diameter mm: 160
