32215J
Tier-one manufacturer — brand supplied may vary ✓ Verified against manufacturer sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What 32215J means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
2 |
Diameter series | Diameter series 2 (light) |
15 |
Bore | Bore code 15 × 5 = 75 mm |
J |
Cage | Pressed steel cage |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
32215J specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 75 mm | 2.9528 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 130 mm | 5.1181 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 33.25 mm | 1.3091 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Cage | Pressed steel cage | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| SKF | 32215J | Timken Interchange Guide |
| TIMKEN | 32215 | Timken Interchange Guide |
Also listed in manufacturer interchange tables (2): confirm suffix codes before ordering
- FAG 32215A (Timken Interchange Guide)
- NTN 32215U (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32215J is a tapered roller bearing (metric, ISO 355), 75 mm bore × 130 mm OD × 33.25 mm wide (2.9528 × 5.1181 × 1.3091 in). It has a pressed steel cage. Published interchange tables list it as equivalent to SKF 32215J, TIMKEN 32215.
The 32215J is a metric tapered roller bearing with a 75 mm bore diameter, conforming to ISO 355 standards. Tapered roller bearings use conical raceways and tapered rollers to handle combined radial and axial loads efficiently in a single direction.
32215J Tapered Roller Metric Type