32032XM-90KM4
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32032XM-90KM4 means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
0 |
Diameter series | Diameter series 0 (extra light) |
32 |
Bore | Bore code 32 × 5 = 160 mm |
XM |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
90KM |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
4 |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32032XM-90KM4 specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 160 mm | 6.2992 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 240 mm | 9.4488 in | Supplier catalogue listing |
| Width, assembled (T) | 51 mm | 2.0079 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Bore | Tapered bore (1:12) | Stated by the designation | |
| Cage | Stamped Steel Cage-cone backface clearance:3 mm | Supplier catalogue listing | |
| Configuration | Matched bearing assembly (90-series assembly suffix) | Stated by the designation | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32032XM (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32032XM-90KM4 is a tapered roller bearing (metric, ISO 355), 160 mm bore × 240 mm OD × 51 mm wide (6.2992 × 9.4488 × 2.0079 in). It has a tapered bore (1:12).
The 32032XM-90KM4 is a metric tapered roller bearing assembly with a 160 mm bore diameter and 1:12 tapered bore. This matched bearing assembly is designed to accommodate combined radial and axial loads in a single direction, with the tapered bore enabling secure mounting on tapered shafts or adapter sleeves.
