2208K-2RS

Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO table
$49.02 USD
$49.02 USD
Sale Sold out
Bore40 mm 1.5748 in
Outside dia.80 mm 3.1496 in
Width23 mm 0.9055 in
TypeSelf-aligning ball bearing
SealingContact rubber seals, both sides
ClearanceNormal
Ships from US partner stock — flat-rate shipping, calculated by weight at checkout
  • 2208 K 2RS Ball Bearings
1 1

Image is for illustration purposes only.

What 2208K-2RS means

CodePositionMeaning
22 Series Series 22: self-aligning ball bearing, wide (width series 2), diameter series 2 (light). The type digit 1 is left out of these numbers
08 Bore Bore code 08 × 5 = 40 mm
K Bore type Tapered bore, taper 1:12 (mounts on an adapter or withdrawal sleeve)
2RS Closure Contact rubber seals, both sides

Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.

2208K-2RS specifications

Specification Metric Inch Basis
Bore (d) 40 mm 1.5748 in ISO table for this designation, confirmed by supplier data
Outside diameter (D) 80 mm 3.1496 in Supplier catalogue listing
Width (B) 23 mm 0.9055 in Supplier catalogue listing
Bearing type Self-aligning ball bearing Stated by the designation
Seals / shields Contact rubber seals, both sides Stated by the designation
Internal clearance Normal (CN): no clearance code in the designation Stated by the designation
Bore Tapered bore (1:12) Stated by the designation
Tolerance class Normal (ISO P0 / ABEC 1): no tolerance-class code Stated by the designation
Material 52100 bearing steel Supplier catalogue listing

2208K-2RS is a self-aligning ball bearing, 40 mm bore × 80 mm OD × 23 mm wide (1.5748 × 3.1496 × 0.9055 in). It has rubber contact seals on both sides and a tapered bore (1:12).

The 2208K-2RS is a self-aligning ball bearing with a 40 mm tapered bore (1:12 ratio), 80 mm outside diameter, and contact rubber seals on both sides for protection against contaminants. Constructed from 52100 bearing steel with normal radial clearance, this bearing features a double-row ball design that compensates for shaft misalignment.

Related sizes & variants

  • 2208 · 40×80×23 mm · Open
  • 2208-2RS · 40×80×23 mm · Double Sealed
  • 2208K · 40×80×23 mm · Open
  • 2205-2RS · 25×52×18 mm · Double Sealed
  • 2206-2RS · 30×62×20 mm · Double Sealed
  • 2207 · 35×72×23 mm · Open
  • 2209-2RS · 45×85×23 mm · Double Sealed
  • 2210-2RS · 50×90×23 mm · Double Sealed
  • 2211-2RS · 55×100×25 mm · Double Sealed

Browse all Ball Bearings →