RLS11NR
Tier-one manufacturer — brand supplied may vary ✓ Dimensions confirmed by two independent sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What RLS11NR means
| Code | Position | Meaning |
|---|---|---|
RLS |
Type | Inch-dimension radial ball bearing, light series |
11 |
Bore | Bore in eighths of an inch: 11/8 = 1-3/8 in |
NR |
Snap ring | Snap-ring groove in the outer ring, with the snap ring fitted |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
RLS11NR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 34.92 mm | 1-3/8 in (1.375) | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 76.2 mm | 3 in (3) | Two independent catalogue sources agree |
| Width (B) | 17.46 mm | 11/16 in (0.6875) | Two independent catalogue sources agree |
| Bearing type | Inch-dimension radial ball bearing, light series | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Snap ring | Snap-ring groove in the outer ring, with the snap ring fitted | Stated by the designation | |
RLS11NR is an inch-dimension radial ball bearing, light series, 1-3/8 in bore × 3 in OD × 11/16 in wide (34.92 × 76.2 × 17.46 mm). It has a snap-ring groove in the outer ring, with the snap ring fitted.
The RLS11 NR is a single row deep groove ball bearing from the RLS series, featuring a snap ring groove with snap ring (NR suffix) for simplified axial location in housing bores. Deep groove ball bearings are the most widely used bearing type, offering low friction and the ability to accommodate radial and axial loads in both directions.
Series: RLS
Model Number: RLS11 NR
Bore/Inner Diameter Inch: 1.375
Bore/Inner Diameter mm: 34.925
Outside Diameter Inch: 3
Outside Diameter mm: 76.2
