RLS10NR
Tier-one manufacturer — brand supplied may vary ✓ Dimensions confirmed by two independent sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What RLS10NR means
| Code | Position | Meaning |
|---|---|---|
RLS |
Type | Inch-dimension radial ball bearing, light series |
10 |
Bore | Bore in eighths of an inch: 10/8 = 1-1/4 in |
NR |
Snap ring | Snap-ring groove in the outer ring, with the snap ring fitted |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
RLS10NR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 31.75 mm | 1-1/4 in (1.25) | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 57.15 mm | 2-1/4 in (2.25) | Two independent catalogue sources agree |
| Width (B) | 15.88 mm | 5/8 in (0.625) | Two independent catalogue sources agree |
| Bearing type | Inch-dimension radial ball bearing, light series | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Snap ring | Snap-ring groove in the outer ring, with the snap ring fitted | Stated by the designation | |
RLS10NR is an inch-dimension radial ball bearing, light series, 1-1/4 in bore × 2-1/4 in OD × 5/8 in wide (31.75 × 57.15 × 15.88 mm). It has a snap-ring groove in the outer ring, with the snap ring fitted.
The RLS10 NR is a deep groove ball bearing from the RLS series, featuring a snap ring groove with snap ring (NR suffix) for axial location in housing bores. Deep groove ball bearings are versatile, single-row radial bearings capable of accommodating radial loads and moderate thrust loads in both directions.
RLS10 NR RLS Series Deep Groove Ball Bearing
