33217JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 33217JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
3 |
Width series | Width series 3 |
2 |
Diameter series | Diameter series 2 (light) |
17 |
Bore | Bore code 17 × 5 = 85 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
33217JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 85 mm | 3.3465 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 150 mm | 5.9055 in | Supplier catalogue listing |
| Width, assembled (T) | 49 mm | 1.9291 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (2): confirm suffix codes before ordering
- TIMKEN 33217 (Timken Interchange Guide)
- FAG 33217A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
33217JR is a tapered roller bearing (metric, ISO 355), 85 mm bore × 150 mm OD × 49 mm wide (3.3465 × 5.9055 × 1.9291 in).
The 33217JR is a metric tapered roller bearing conforming to ISO 355 standards, featuring an 85 mm bore diameter from the 332 series. Tapered roller bearings use conical rolling elements between inner and outer race cups to handle combined radial and axial loads efficiently.
33217JR Tapered Roller Bearing, 85 mm Inner Diameter x 150 mm Outer Diameter x 49 mm Width
