33214-90KA1
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 33214-90KA1 means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
3 |
Width series | Width series 3 |
2 |
Diameter series | Diameter series 2 (light) |
14 |
Bore | Bore code 14 × 5 = 70 mm |
90K |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
A1 |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
33214-90KA1 specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 70 mm | 2.7559 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 125 mm | 4.9213 in | Supplier catalogue listing |
| Width, assembled (T) | 41 mm | 1.6142 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Bore | Tapered bore (1:12) | Stated by the designation | |
| Cage | Stamped Steel Cage-cone backface clearance:3.6 mm | Supplier catalogue listing | |
| Configuration | Matched bearing assembly (90-series assembly suffix) | Stated by the designation | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (4): confirm suffix codes before ordering
- SKF 33214J (Timken Interchange Guide)
- TIMKEN 33214 (Timken Interchange Guide)
- FAG 33214 (Timken Interchange Guide)
- NTN 33214A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
33214-90KA1 is a tapered roller bearing (metric, ISO 355), 70 mm bore × 125 mm OD × 41 mm wide (2.7559 × 4.9213 × 1.6142 in). It has a tapered bore (1:12).
The 33214-90KA1 is a metric tapered roller bearing assembly featuring a 70mm tapered bore (1:12 taper) in the ISO 355 standard 332 series. This matched bearing assembly is supplied as a complete unit with cone and cup optimized for proper internal clearance and load distribution.
33214-90KA1 TRB Metric Assembly 4-8 OD
