33214JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 33214JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
3 |
Width series | Width series 3 |
2 |
Diameter series | Diameter series 2 (light) |
14 |
Bore | Bore code 14 × 5 = 70 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
33214JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 70 mm | 2.7559 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 125 mm | 4.9213 in | Supplier catalogue listing |
| Width, assembled (T) | 41 mm | 1.6142 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (4): confirm suffix codes before ordering
- SKF 33214J (Timken Interchange Guide)
- TIMKEN 33214 (Timken Interchange Guide)
- FAG 33214 (Timken Interchange Guide)
- NTN 33214A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
33214JR is a tapered roller bearing (metric, ISO 355), 70 mm bore × 125 mm OD × 41 mm wide (2.7559 × 4.9213 × 1.6142 in).
The 33214JR is a metric tapered roller bearing conforming to ISO 355 standards, featuring a 70 mm bore diameter, 125 mm outer diameter, and 41 mm width. Tapered roller bearings use conical rolling elements to handle combined radial and axial loads efficiently.
33214JR Tapered Roller Bearing, 70 mm Inner Diameter x 125 mm Outer Diameter x 41 mm Width
