33212J
Tier-one manufacturer — brand supplied may vary ✓ Verified against manufacturer sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What 33212J means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
3 |
Width series | Width series 3 |
2 |
Diameter series | Diameter series 2 (light) |
12 |
Bore | Bore code 12 × 5 = 60 mm |
J |
Cage | Pressed steel cage |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
33212J specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 60 mm | 2.3622 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 110 mm | 4.3307 in | Supplier catalogue listing |
| Width, assembled (T) | 38 mm | 1.4961 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Cage | Pressed steel cage | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| SKF | 33212 | SKF Master Interchange |
| TIMKEN | 33212 | Timken Interchange Guide |
Also listed in manufacturer interchange tables (3): confirm suffix codes before ordering
- SKF 33212/Q (Timken agricultural interchange)
- TIMKEN 33212-90KA1 (Timken agricultural interchange)
- NTN 4T-33212 (Timken agricultural interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
33212J is a tapered roller bearing (metric, ISO 355), 60 mm bore × 110 mm OD × 38 mm wide (2.3622 × 4.3307 × 1.4961 in). It has a pressed steel cage. Published interchange tables list it as equivalent to SKF 33212, TIMKEN 33212.
The 33212J is a tapered roller bearing with a 60 mm bore diameter, conforming to metric ISO 355 standards. Tapered roller bearings use conical raceways and tapered rollers to handle combined radial and axial loads efficiently.
