33211JR
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 33211JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
3 |
Width series | Width series 3 |
2 |
Diameter series | Diameter series 2 (light) |
11 |
Bore | Bore code 11 × 5 = 55 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
33211JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 55 mm | 2.1654 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 100 mm | 3.937 in | Supplier catalogue listing |
| Width, assembled (T) | 35 mm | 1.378 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (4): confirm suffix codes before ordering
- SKF 33211/Q (Timken agricultural interchange)
- TIMKEN 33211-90KA1 (Timken agricultural interchange)
- FAG 33211 (Timken Interchange Guide)
- NTN 4T-33211 (Timken agricultural interchange)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
33211JR is a tapered roller bearing (metric, ISO 355), 55 mm bore × 100 mm OD × 35 mm wide (2.1654 × 3.937 × 1.378 in).
The 33211JR is a metric tapered roller bearing with a 55 mm bore diameter from the 332 series. Tapered roller bearings use conical rolling elements and raceways to handle combined radial and axial loads, with the ability to support thrust loads in one direction.
