32932X
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32932X means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
9 |
Diameter series | Diameter series 9 (very thin) |
32 |
Bore | Bore code 32 × 5 = 160 mm |
X |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32932X specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 160 mm | 6.2992 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 220 mm | 8.6614 in | Supplier catalogue listing |
| Width, assembled (T) | 38 mm | 1.4961 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Material | Through hardened steel | Supplier catalogue listing | |
| Dynamic load rating, C | 275.79 kN | 62,000 lbf |
|---|---|---|
| Static load rating, C0 | 520.44 kN | 117,000 lbf |
| Limiting speed, grease | 1,500 rpm | |
| Limiting speed, oil | 1,900 rpm | |
32932X is a tapered roller bearing (metric, ISO 355), 160 mm bore × 220 mm OD × 38 mm wide (6.2992 × 8.6614 × 1.4961 in). NTN catalogue values for 32932X: dynamic load rating C = 275.79 kN, static C0 = 520.44 kN, limiting speed 1,500 rpm on grease, 1,900 rpm on oil.
The 32932X is a metric tapered roller bearing set from the 329 series with a 160 mm bore diameter. Tapered roller bearings use conical rolling elements to handle combined radial and axial loads, with all contact lines converging at a common apex point on the bearing axis.
