32930M-90KM1
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 32930M-90KM1 means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
9 |
Diameter series | Diameter series 9 (very thin) |
30 |
Bore | Bore code 30 × 5 = 150 mm |
M90KM |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
1 |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32930M-90KM1 specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 150 mm | 5.9055 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 210 mm | 8.2677 in | Supplier catalogue listing |
| Width, assembled (T) | 38 mm | 1.4961 in | Supplier catalogue listing |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
| Bore | Tapered bore (1:12) | Stated by the designation | |
| Configuration | Matched bearing assembly (90-series assembly suffix) | Stated by the designation | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32930M (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32930M-90KM1 is a tapered roller bearing (metric, ISO 355), 150 mm bore × 210 mm OD × 38 mm wide (5.9055 × 8.2677 × 1.4961 in). It has a tapered bore (1:12).
The 32930M-90KM1 is a metric tapered roller bearing assembly conforming to ISO 355 standards. This matched assembly features a 150 mm tapered bore (1:12 taper ratio) in the 329 series, designed to handle combined radial and axial loads with the geometry optimized for superior load distribution through tapered raceways.
32930M-90KM1 TRB Metric Assembly 8-12 OD
