32312J
Tier-one manufacturer — brand supplied may vary ✓ Verified against manufacturer sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What 32312J means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
3 |
Diameter series | Diameter series 3 (medium) |
12 |
Bore | Bore code 12 × 5 = 60 mm |
J |
Cage | Pressed steel cage |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
32312J specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 60 mm | 2.3622 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 130 mm | 5.1181 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 48.5 mm | 1.9094 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Cage | Pressed steel cage | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| TIMKEN | 32312 we stock this | Timken Interchange Guide |
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 32312A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32312J is a tapered roller bearing (metric, ISO 355), 60 mm bore × 130 mm OD × 48.5 mm wide (2.3622 × 5.1181 × 1.9094 in). It has a pressed steel cage. Published interchange tables list it as equivalent to TIMKEN 32312.
The 32312J is a metric tapered roller bearing from the 323 series with a 60 mm bore diameter. Tapered roller bearings use conical rolling elements between inner and outer race cones to handle combined radial and axial loads in a single direction.
Bore/Inner Diameter Inch: 2.362
Bore/Inner Diameter mm: 60
Outside Diameter Inch: 5.118
Outside Diameter mm: 130
