32210JR
Tier-one manufacturer — brand supplied may vary ✓ Dimensions checked: ISO table and supplier data agreeCouldn't load pickup availability
Image is for illustration purposes only.
What 32210JR means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
2 |
Diameter series | Diameter series 2 (light) |
10 |
Bore | Bore code 10 × 5 = 50 mm |
JR |
Maker code | Manufacturer-specific code, not decoded here. Ask us if it matters for your application. |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Codes marked "not decoded" are maker-specific; ask us if one matters for your application. Decode any other number with the bearing number decoder.
32210JR specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 50 mm | 1.9685 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 90 mm | 3.5433 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 24.75 mm | 0.9744 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open | Supplier catalogue listing | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (4): confirm suffix codes before ordering
- SKF 32210 (Timken Interchange Guide)
- TIMKEN 32210M (Timken Interchange Guide)
- FAG 32210A (Timken Interchange Guide)
- NTN 32210A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32210JR is a tapered roller bearing (metric, ISO 355), 50 mm bore × 90 mm OD × 24.75 mm wide (1.9685 × 3.5433 × 0.9744 in).
The 32210JR is a metric tapered roller bearing with a 50 mm bore diameter from the 322 series, conforming to ISO 355 standards. Tapered roller bearings use conical rolling elements to handle combined radial and axial loads through line contact between rollers and raceways.
32210JR Tapered Roller Bearing, 50 mm Inner Diameter x 90 mm Outer Diameter x 24.75 mm Width
