32210J
Tier-one manufacturer — brand supplied may vary ✓ Verified against manufacturer sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What 32210J means
| Code | Position | Meaning |
|---|---|---|
3 |
Type | Tapered roller bearing (metric) |
2 |
Width series | Width series 2 |
2 |
Diameter series | Diameter series 2 (light) |
10 |
Bore | Bore code 10 × 5 = 50 mm |
J |
Cage | Pressed steel cage |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
32210J specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 50 mm | 1.9685 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 90 mm | 3.5433 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Width, assembled (T) | 24.75 mm | 0.9744 in | Maker's catalogue (PEER Bearing), confirmed by supplier data |
| Bearing type | Tapered roller bearing (metric, ISO 355) | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Cage | Pressed steel cage | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| SKF | 32210 | Timken Interchange Guide |
| TIMKEN | 32210M | Timken Interchange Guide |
Also listed in manufacturer interchange tables (2): confirm suffix codes before ordering
- FAG 32210A (Timken Interchange Guide)
- NTN 32210A (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
32210J is a tapered roller bearing (metric, ISO 355), 50 mm bore × 90 mm OD × 24.75 mm wide (1.9685 × 3.5433 × 0.9744 in). It has a pressed steel cage. Published interchange tables list it as equivalent to SKF 32210, TIMKEN 32210M.
The 32210J is a metric tapered roller bearing with a 50 mm bore diameter, conforming to ISO 355 standards. Tapered roller bearings use conical raceways and tapered rollers to handle combined radial and axial loads, with load capacity increasing with the contact angle.
Outside Diameter Inch: 3.543
Outside Diameter mm: 90
