1315
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 1315 means
| Code | Position | Meaning |
|---|---|---|
1 |
Type | Self-aligning ball bearing |
3 |
Diameter series | Diameter series 3 (medium) |
15 |
Bore | Bore code 15 × 5 = 75 mm |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
1315 specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 75 mm | 2.9528 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 160 mm | 6.2992 in | Supplier catalogue listing |
| Width (B) | 37 mm | 1.4567 in | Supplier catalogue listing |
| Bearing type | Self-aligning ball bearing | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Internal clearance | Normal (CN): no clearance code in the designation | Stated by the designation | |
| Bore | Cylindrical (straight) bore | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
| Brand | Part number | Basis |
|---|---|---|
| TIMKEN | 1315 | Timken Interchange Guide |
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 1315S (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
1315 is a self-aligning ball bearing, 75 mm bore × 160 mm OD × 37 mm wide (2.9528 × 6.2992 × 1.4567 in). Published interchange tables list it as equivalent to TIMKEN 1315.
The 1315 is a self-aligning ball bearing with a 75mm bore diameter from the 13 series. Self-aligning ball bearings feature two rows of balls running on a spherical outer ring raceway, allowing the bearing to accommodate angular misalignment between the shaft and housing.
1315 1300 Series Self-Aligning Ball Bearing
