1314
Tier-one manufacturer — brand supplied may vary ✓ Bore checked against the ISO tableCouldn't load pickup availability
Image is for illustration purposes only.
What 1314 means
| Code | Position | Meaning |
|---|---|---|
1 |
Type | Self-aligning ball bearing |
3 |
Diameter series | Diameter series 3 (medium) |
14 |
Bore | Bore code 14 × 5 = 70 mm |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
1314 specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 70 mm | 2.7559 in | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 150 mm | 5.9055 in | Supplier catalogue listing |
| Width (B) | 35 mm | 1.378 in | Supplier catalogue listing |
| Bearing type | Self-aligning ball bearing | Stated by the designation | |
| Seals / shields | Open (no seals or shields) | Stated by the designation | |
| Internal clearance | Normal (CN): no clearance code in the designation | Stated by the designation | |
| Bore | Cylindrical (straight) bore | Stated by the designation | |
| Tolerance class | Normal (ISO P0 / ABEC 1): no tolerance-class code | Stated by the designation | |
Equivalent to / interchanges with
Also listed in manufacturer interchange tables (1): confirm suffix codes before ordering
- TIMKEN 1314L (Timken Interchange Guide)
These carry maker-specific suffix codes (cage, lubrication groove, design) that we have not matched one-for-one. The size is the same; check the codes against your application.
Equivalents are dimensional and closure-for-closure: same bore, outside diameter, width, seals or shields and internal clearance. Bearing interchange tables
1314 is a self-aligning ball bearing, 70 mm bore × 150 mm OD × 35 mm wide (2.7559 × 5.9055 × 1.378 in).
Self Aligning Ball Bearing 1314
The Self-Aligning Series 1200 & 1300 are engineered with two rows of balls sharing a common sphered raceway in the outer ring. These bearings feature a unique self-aligning capability, allowing for angular misalignment between the shaft and the housing. For applications requiring a tapered bore, the part number includes a 'K' suffix. This design is particularly advantageous in scenarios where misalignment may occur due to mounting errors or shaft deflection. Additionally, non-sealed self-aligning ball bearings in this series boast the lowest friction of any bearing type, enhancing efficiency and performance. If you're seeking sealed options, consider our 2200-2RS self-aligning series, which offers the same self-aligning benefits with the added protection of seals.
ID mm: 70
ID Decimal: 2.7559
Bore: Straight
OD mm: 150
OD Decimal: 5.9055
W mm: 35
W Decimal: 1.3779
Weight: 0
