RLS6-2RS
Tier-one manufacturer — brand supplied may vary ✓ Dimensions confirmed by two independent sourcesCouldn't load pickup availability
Image is for illustration purposes only.
What RLS6-2RS means
| Code | Position | Meaning |
|---|---|---|
RLS |
Type | Inch-dimension radial ball bearing, light series |
6 |
Bore | Bore in eighths of an inch: 6/8 = 3/4 in |
2RS |
Closure | Contact rubber seals, both sides |
Read from the ISO / ABMA numbering rules and the makers' published suffix conventions. Decode any other number with the bearing number decoder.
RLS6-2RS specifications
| Specification | Metric | Inch | Basis |
|---|---|---|---|
| Bore (d) | 19.05 mm | 3/4 in (0.75) | ISO table for this designation, confirmed by supplier data |
| Outside diameter (D) | 47.62 mm | 1-7/8 in (1.875) | Two independent catalogue sources agree |
| Width (B) | 14.29 mm | 9/16 in (0.5625) | Two independent catalogue sources agree |
| Bearing type | Inch-dimension radial ball bearing, light series | Stated by the designation | |
| Seals / shields | Contact rubber seals, both sides | Stated by the designation | |
RLS6-2RS is an inch-dimension radial ball bearing, light series, 3/4 in bore × 1-7/8 in OD × 9/16 in wide (19.05 × 47.62 × 14.29 mm). It has rubber contact seals on both sides.
The RLS6-2RS is a deep groove ball bearing from the RLS series, featuring double rubber seals (2RS) on both sides for effective protection against contaminants and lubricant retention. Deep groove ball bearings are versatile radial bearings capable of handling both radial and axial loads in both directions.
Series: RLS
Model Number: RLS6 2RS
Bore/Inner Diameter Inch: 0.75
Bore/Inner Diameter mm: 19.05
Outside Diameter Inch: 1.875
Outside Diameter mm: 47.625
